12V Infinitum Battery Desulfator Optimizer + FREE 4-Day Shipping (2 Unit Bundle)
SKU:
$89.98
$62.99 - $67.49
$67.49
per item
Price Set: US Dollars
SPECIAL BUNDLE OFFER:
25% OFF + FREE EXPRESS SHIPPING*
30% OFF + FREE STANDARD INSURED SHIPPING
Hurry! Valid for a limited time only!
*FREE Express Shipping is available for this 2 unit bundle shipped to Australia, Canada, United Kingdom & USA. Also available to Brunei, China, Hong Kong, Indonesia, Japan, Korea, Macau, Singapore, Taiwan & Thailand. FREE DELIVERY for all other countries.
BUY NOW OR FIND OUT MORE
SPECIAL BUNDLE OFFER:
25% OFF + FREE EXPRESS SHIPPING*
30% OFF + FREE STANDARD INSURED SHIPPING
Hurry! Valid for a limited time only!
*FREE Express Shipping is available for this 2 unit bundle shipped to Australia, Canada, United Kingdom & USA. Also available to Brunei, China, Hong Kong, Indonesia, Japan, Korea, Macau, Singapore, Taiwan & Thailand. FREE DELIVERY for all other countries.
BUY NOW OR FIND OUT MORE
|
Battery Desulfators have always been known to extend the lifespan of lead acid batteries. Costing only a fraction of the price of a battery, paybacks are immediate. Not only is money saved and made from the extension of battery lifespan, but time, money and manpower is also saved and can be put to better use from lowering the frequency of battery changes.
|
How you will benefit:
Also available on: Amazon Prime USA | Canada | Italy | Germany | France | Spain | |
Reviews from Amazon
I have many years of experience with deep cycle and related batteries. I have varying success with other top desulfators but I can tell you first hand that the Infinitum desulfator works great for removing medium and hard sulfation within a battery. I tried this on 6 volt and marine batteries with noticeable improvements in 1 to 2 weeks as long as there is no plate damage then you can recover it
This little unit has revived two 12V lead acid batteries. One was just having trouble holding a charge but the other was completely dead having sat that way for about 4 years. It took about 10 days for that one. Read the instructions. It only works when the battery is being charged. Found out the hard way. Used a 6 amp auto charger with it and found success. Thinking about one for every battery I own.
|
Used it on a few old batteries i have and it did a very good job on some of them. It won't clean up all batteries due to plate damage but it worked on several of mine. I bought another to use on other batteries full time.
After having my solar batteries start to lose their longevity in keeping a charge I tried out one , then bought another for the 2 oldest paired batteries and installed them on each battery.
Have noticed that my bank is now staying above the 12.5 volt rating overnight, whereas before they were draining to below 11.9 - 11.5 volts on a nightly basis. I think these made a difference and brought my batteries a new life and saved me the headache of buying $500 more to replace the semi-old solar batteries. Best price and highly recommended |
|
BUY NOW
|
|
| SPECIFICATIONS | |
|
|
|
| Unique Product Code (UPC) | 635292895944 |
|
|
|
| Input Voltage Range | 11.5 V - 17 V |
|
|
|
| Output Current Range | 1.6 A (pk) |
|
|
|
| Cut-In Voltage (Vd) | 12.5 V |
|
|
|
| Operation Indication | Green LED |
|
|
|
| Low Voltage Indication | Red LED |
|
|
|
| Dimensions | 25mm (H) x 78mm (D) x 60mm (W) |
|
|
|
| Unit Weight | 180g (0.397lbs) |
|
|
|
| Flame Retardant Encapsulation | Yes |
|
|
|
| Polarity Protection | Yes |
|
|
|
| Water Resistance | IP65 |
|
|
|
| Short Circuit Protection | 3 A, Auto Reset |
|
|
|
| Connection Leads | UL 1015 |
|
|
|
| Terminations | Ring or Fork Lugs |
|
|
|
| PCB Specification | CEM 1, UL 94V-0 |
|
|
|
| Safety Standard | IEC 380 |
|
|
|
| EMC Standard | VDE 0871 |
|
|
|
| Aluminum Casing | 6063-T5 (Anodized BS1615) |
|
|
|
| Compliance | CE |
|
|
|
| Standards | IEC 61000-4-6 and 95/54 EEC Annex VII |
|
|
|
